| |
REPSOL SUPER TAURO FND 220
Description
Top quality oil for lubricating all types of industrial gears that require the highest performance from a lubricant. Formulated with bases that have been specially selected for their high viscosity indexes, and sulphur-phosphorus additives that give them excellent extreme pressure, disemulsion, and anti-rust characteristics, as well as very high resistance to gear micro-pitting.
Recommended uses
S¨²per Tauro FND oils are higher performing than conventional gear oils, because they are suitablefor systems that require high levels of resistance to oxidisation and load capacity. These oils exceed the requirements specified by Flender.
Characteristics
Excellent stability against oxidisation..
Resistant to high loads due to its suitable EP additives.
Very good anti-rust protection.
Great disemulsion capacity.
Effective protection of steel and alloys.
Good anti-foaming characteristics.
Highly resistant to gear micro-pitting.
Quality e L vel
DIN-51517 Parte 3 CLP Flender
ISO 12925-1 CKD
Technical Data-
- |
UNITS |
METHOD |
VALUE |
VALUE |
ISO Grade |
- |
- |
220 |
320 |
Density at 15oC |
g/cm3 |
ASTM D 4052 |
0.899 |
0.904 |
Viscosity at 100oC |
cSt |
ASTM D 445 |
18.72 |
24.03 |
Viscosity at 40oC |
cSt |
ASTM D 445 |
220 |
320 |
Viscosity Index |
- |
ASTM D 2270 |
95 |
95 |
Flash point |
oC |
ASTM D 92 |
205 |
210 |
Pour point |
oC |
ASTM D 97 |
-9 |
-9 |
Corrosiveness to Copper 3h at
100oC |
- |
ASTM D 130 |
1a |
1a |
Rust, methods A and B |
- |
ASTM D 665 |
Pass |
Pass |
FAG FE-8 roller wear |
m DIN |
51819-3 |
3 |
3 |
Micro-pitting test |
- |
FVA 54/7 |
GF>10 |
GF>10 |
FZG, Stage 12 |
- |
DIN 51354 |
Pass |
Pass |
Available in
Drums of 185 kg, Containers of 875 kg Bulk
Hazard identification
This product is not classified as toxic or hazardous under current legislation.
Handling
Certain minimum precautions to avoid prolonged contact with the skin should be taken when handling. The use of gloves, visors or masks is recommended in order to avoid splashes.
Health and Safety Hazards
Inhalation: Minimum risk of inhalation as it is a non-volatile product.
Ingestion: Do not provoke vomiting. Drink water. Seek medical assistance.
Contact with Skin: Wash with abundant water and soap.
Eyes: Wash with abundant water.
General measures: Seek medical assistance.
FIRE fighting measures
No special measures are required.
Fire control: Foams, dry chemicals, CO2, water spray. Do not apply water jet directly as this may cause the product to spread.
Environmental Precautions
Danger of physical contamination in the case of spillage (water flows, coastal areas, the ground, etc.) due to its floating capacity and oily consistency which may cause damage to fauna and flora with which it comes into contact. Avoid its penetration into water containers or outlets.
Decontamination and cleaning: Treat as an accidental oil spillage. Avoid spreading by using mechanical barriers and eliminate using both physical and chemical means.
|
|
